Справочник Пользователя для Ultralink UL2-DA

Скачать
Страница из 4
UltraLink 2
         
Quick Start Guide 
     
 
         UL2-SA (Single Access)
 
 
 
 
 
 
 
 
 
  FRONT 
 
 
 
 
REAR 
 
To KVM 
 
To Computer 
    
      
           UL2-DA (Dual Access)
 
 
 
Switch 1 - Power Option switch  
Switch 2 - unit configuration switch 
Located on the side of all models  
(S1 and S2 Off for normal operation)
 
 
To configure the UL 2, the default IP address (192.168.1.42) must be changed to be compatible with 
your network. There are two different ways to configure the UltraLink 2’s network information, using the 
USB ports or a network crossover cable.  Following explains both methods. 
1- Unit Configuration via USB ports 
The configuration procedure using USB connections is shown below.  
 
 
 
 
1.  Position Switch 2 on the UltraLink 2 to the ON position 
2.  Disconnect unit from the network if connected (computer and monitor should be ON) 
3.  Connect the PS/2 to USB adapters to the CPU adapter cable and to the computer’s USB ports. 
4.  Connect the PS/2 connectors on the other end of the cable to the UltraLink 2’s PS/2 connectors. 
5.  When the keyboard and mouse connectors are connected to the UltraLink 2, the computer 
operating system will detect the UltraLink 2 unit as a removable drive. 
6.  Using Windows explorer, select the UL-2 removable drive and you should see a text file name 
“Config.txt”. Edit this text file using a text editor like Notepad and change the IP Address, IP 
NetMask and IP Gateway to the IP address information assigned to the UltraLink 2 unit. Also the 
Unit name, Use DHCP, and Reset Admin Password options can be selected here.  Complete 
instructions are included in the “Config.txt” file. 
7.  When changes are complete, save the file and close the text editor. 
 
 
 
PS/2 to USB 
adapters 
 
Dual access model 
connect to lower 
PS/2 ports 
 
DO NOT 
Connect the monitor 
HD15 connectors  
 
 
 
CPU Adapter 
Cable 
Computer Requirements 
OS – XP or Vista 
   2 – USB 2.0 ports