Справочник Пользователя для Vanguard Managed Solutions 6500 PLUS
Installation
2-63
Replacing Processor Card Components
Replacing ID Modules
Replace the ID
Module
Module
Perform these steps to replace the ID Module:
Step
Action
1
Remove the card from the nest or enclosure.
2
Locate the ID Module (Figure 2-17) and note the location of the
notch, which is toward the front of the card.
notch, which is toward the front of the card.
This will help you orient the new chip.
3
Using a standard chip-puller, remove the ID Module.
4
Insert the new ID Module into the socket. Be sure that the notch in
the chip is oriented toward the front of the card.
the chip is oriented toward the front of the card.