Справочник Пользователя для Varec 8315 Series

Using ViewRTU

TankGate Interface

84 

Installation and Operations Manual

Configuring the point involves entering configuration parameters. In some cases, 

connections to other points are required in order to perform a task. Creating 

connections involves setting references to allow data to be transferred between points. 

An outline of the section is listed below:

This section describes the method used to configure individual points including:

• 

Adding a Point

• 

This section describes how to define a point from the Main window.

• 

Entering Point Data

• 

This section describes how to enter the point’s parameters. Parameters are 

entered from the Edit Point Window.

• 

Modifying Strap Tables

• 

This section describes how to modify strap tables in ViewRTU.

This section describes the spreadsheet mode. The principles involved in point 

configuration are the same, but the methods are slightly different.

• 

Adding Multiple Points

• 

This section describes how to define a point from either the Main window or 

the Spreadsheet Mode window.

• 

Entering Point Data

• 

This section describes how to enter a point’s parameters. Parameters are 

entered from the Spreadsheet Mode window.

This section describes how to create connections between various points. Points may be 

used to retrieve and/or deliver data from other points.

Configuring the point involves entering configuration parameters. In some cases, 

connections between points must also be required in order to perform a function. All of 

these steps can be implemented from the Point Connections window. To display the 

Point Connections window, follow one of the methods listed below:

The user is able to add a point or point type by clicking on the   Add Point push-

button from the toolbar or by selecting Add from the Point menu.Once the 

point is added, the user is then able to configure the point. Defined point types 

appear in the Point Icon Selection Area and in the Spreadsheet Summary of the 

main window.

This section describes how to configure the parameters of any point. Each point has its 

own Edit Point window that requires some degree of configuration. Both the 

configuration and dynamic attributes of the point are found in the Edit Point Window. 

From this window, the user is able to view and edit database parameters.