Справочник Пользователя для National Instruments NI 9481
NI 9481 Operating Instructions and Specifications
14
ni.com
Physical Characteristics
If you need to clean the module, wipe it with a dry towel.
Screw-terminal wiring ...................... 12 to 24 AWG copper
conductor wire with 10 mm
(0.39 in.) of insulation
stripped from the end
(0.39 in.) of insulation
stripped from the end
Torque for screw terminals ............... 0.5 to 0.6 N · m
(4.4 to 5.3 lb · in.)
Ferrules ............................................. 0.25 mm
2
to 2.5 mm
2
Weight............................................... 150 g (5.3 oz)
Safety
Safety Voltages
Connect only voltages that are within the following limits.
CHa-to-CHb...................................... 250 V
rms
max,
Measurement Category II
Measurement Category II is for measurements performed on
circuits directly connected to the electrical distribution system.
This category refers to local-level electrical distribution, such as
circuits directly connected to the electrical distribution system.
This category refers to local-level electrical distribution, such as