Справочник Пользователя для Network Technologies ASI-IP-GTW
ASI-IP-GTW User's Manual
Page
29
3.5 Device Info
Figure 8 shows the Device Info page.
Figure 8. The device info page
The upper part of the Device Info page contains product information.
This includes the following parameters:
Name: The name of the unit configured by the user.
Product type: ASI-IP-GTW
Serial number: A number which uniquely identifies the unit.
Software version: The version number of the software running on the
unit.
Software build time: The time and date when the software was
compiled.
Internal temperature: The internal temperature of the unit shown in
degrees Celsius and Fahrenheit.
Flash Power LED: When this button is pressed, the power LEDs on rear
and front of unit will flash for a short period. This functionality can be
used to identify a unit in a rack.
Mode of Operation: Select ‘ASI --> IP’ for IP transmit mode. In this
mode the ASI connectors operate as inputs, and the MPEG2 transport
streams on these can be transmitted on the Ethernet port.
Select ‘ASI <-- IP’ for IP receive mode. In this mode, the ASI connectors
operate as outputs, and transport streams can be mapped from the
Ethernet port to the ASI outputs.
This includes the following parameters:
Name: The name of the unit configured by the user.
Product type: ASI-IP-GTW
Serial number: A number which uniquely identifies the unit.
Software version: The version number of the software running on the
unit.
Software build time: The time and date when the software was
compiled.
Internal temperature: The internal temperature of the unit shown in
degrees Celsius and Fahrenheit.
Flash Power LED: When this button is pressed, the power LEDs on rear
and front of unit will flash for a short period. This functionality can be
used to identify a unit in a rack.
Mode of Operation: Select ‘ASI --> IP’ for IP transmit mode. In this
mode the ASI connectors operate as inputs, and the MPEG2 transport
streams on these can be transmitted on the Ethernet port.
Select ‘ASI <-- IP’ for IP receive mode. In this mode, the ASI connectors
operate as outputs, and transport streams can be mapped from the
Ethernet port to the ASI outputs.