Справочник Пользователя для National Instruments NI WLS/ENET-9163

NI WLS/ENET-9000 Series device software support for Windows 
Vista/XP/2000 is provided by NI-DAQmx.

The DAQ Getting Started Guide, which is accessible from Start»
Programs»National Instruments»NI-DAQ or at 

ni.com/manuals

, 

offers NI-DAQmx users step-by-step instructions for installing software 
and hardware, configuring channels and tasks, and getting started 
developing an application.

If you are using other software, refer to the installation instructions that 
accompany your software.

The NI-DAQmx CD contains example programs that you can use to 
get started programming with the NI WLS/ENET-9000 Series device. 
Refer to the NI-DAQmx for WLS/ENET Devices Getting Started Guide that 
shipped with your device, and is also accessible from Start»Programs»
National Instruments»NI-DAQ, for more information.

You can use the NI WLS/ENET-9000 Series device on a desktop. Figure 3 
shows the stacking grooves for NI ENET-9000 Series devices, and where 
to apply the rubber standoffs for the NI WLS/ENET-9000 devices. For 
secure desktop use, you can adhere the supplied rubber standoffs to the 
underside of the device.

NI ENET-9000 Series Only—the NI ENET-9000 Series device has underside 

grooves that allow it to be stacked on top of other NI ENET-9000 Series devices.

Do not stack an NI WLS-9000 Series device on top of an NI WLS-9000 Series 

device.

This transmitter must not be co-located or operated in conjunction with any other 

antenna or transmitter.