Справочник Пользователя для National Instruments Ultiboard

Shapes and parts can be spaced relative to each other on the board. 

Complete the following steps to space shapes and/or parts: 

1.

Select the elements to be spaced. 

2.

Choose the following commands from the Edit»Align menu to space 
the elements: 

•

Space Across—Spaces three or more objects beside each other 
evenly. 

•

Space Across Plus—Increases horizontal space between two or 
more objects. 

•

Space Across Min—Decreases horizontal space between two or 
more objects. 

•

Space Down—Spaces three or more objects above each other 
evenly. 

•

Space Down Plus—Increases vertical space between two or more 
objects. 

•

Space Down Min—Decreases vertical space between two or 
more objects. 

A group array box is used to place parts in an array, such as memory chips. 
You create the array box first and then place the parts. 

Complete the following steps to place a group array box: 

1.

Select Place»Group Array Box. The New group array properties 
dialog box displays. 

2.

Enter the desired X Spacing and Y Spacing for the array. 

If you wish to enter the number of rows and columns instead of the x-y 
spacing, enable Enter number of columns and rows, and enter the 
desired number of Columns and Rows. 

3.

Optionally, enable Use group centers (will use reference point 
otherwise). 

4.

Click OK and click and drag the mouse to place the array as desired.