Справочник Пользователя для National Instruments Ultiboard

© National Instruments Corporation

In-place part editing lets you add, delete, or change a part and the items that 
make it up. You can add, delete, or move pads, change or move the lines 
that define a part, or place new shapes or lines in the part. 

Complete the following steps to use In-Place Edit on a part: 

1.

Select the part and choose Edit»In-Place Part Edit.  

An editing window opens, showing the selected part. The window also 
shows the surrounding area of the board and the other parts in a 
dimmed view, which cannot be edited. In the example shown below, 
the selected part U2 is bright, while the unselected parts are dimmed. 

 

Refer to the 

 section of Chapter 1, 

, for information about 

changing the degree of dimming displayed on the parts that are not being edited. 

2.

Edit the part using the Place and Draw tools. Refer to the 

section of Chapter 1, 

, for more information. 

3.

To add a pin, choose Place»Pins. The Place Pins dialog box displays.