Справочник Пользователя для National Instruments Ultiboard

© National Instruments Corporation

net, then the pin below the reference point will become the source. 
Refer to the figure below for an example. 

 

Complete the following steps to rename a net:

1.

Select Tools»Netlist Editor and select the desired net from the Net 
drop-down list in the Net edit dialog box. 

2.

Click Rename

in the Net edit dialog box. You are prompted for the 

new net name. 

3.

Type a name for the net.

4.

Click OK to save the new name.

The new net name appears in the Net drop-down list in the Net edit 
dialog box, and in the Nets tab in the Spreadsheet View. 

Complete the following steps to delete a net:

1.

Select Tools»Netlist Editor and click Delete

in the

dialog 

box. The Select the net to delete dialog box appears.

2.

Select the net to be deleted. 

3.

Click Delete to delete the net. The Select the net to delete dialog box 
closes, and the net no longer appears in the Net drop-down list of the 
Net edit

dialog box, or the Nets tab in the Spreadsheet View. The net 

is also removed from the board, but while the net disappears, the traces 
stay on the board. 

There is no deletion confirmation. To cancel the deletion before you click Delete, 

click Close.