Справочник Пользователя для National Instruments Ultiboard

© National Instruments Corporation

Ultiboard’s mechanical CAD function can be used to design enclosure 
boxes, front panels, or any other mechanical part associated with your PCB 
design. Mechanical CAD functionality in Ultiboard takes two forms:

•

You can create multi-layer mechanical CAD design files.

•

You can have mechanical CAD layers as part of your PCB design files. 
Design files can include up to 10 mechanical CAD layers. These are 
accessed through the Layers tab of the Design Toolbox and can be 
used in the same way as other layers in your design. Refer to the 

 section of Chapter 3, 

, for more 

information. 

For the most part, you work with mechanical CAD designs the same way 
that you do with PCB designs, although you cannot place traces or use the 
Autoroute function in mechanical CAD designs. 

Some of the described features may not be available in your edition of 
Ultiboard. Refer to the NI Circuit Design Suite Release Notes for a list of 
the features in your edition. 

To create a new project :

1.

Choose File»New Project. The New Project dialog box appears.  

2.

Type the project name in the Project name field.

3.

From the Design type drop-down list, select Mechanical CAD.

4.

Indicate the folder where the file is to be kept. Either accept the default 
shown in the Location field, or click the Browse button to select a 
different location.

5.

Click OK. The New Project

dialog box disappears, and a blank 

unnamed mechanical CAD design is opened in that project.
The project you just created is also shown in the Projects tab.