Справочник Пользователя для National Instruments Ultiboard

© National Instruments Corporation

Use the PCB Layers tab to work with layer information. 

Use the Parts Position

tab to view and export part position information.

Double-click to display the Select Groups dialog 
box, where you select the part group to which you 
wish to assign the Keep-in/out. You can also set this in 
Keep-in/Keep-out Properties dialog box. Refer to 
the 

 section of 

Chapter 5, 

, for more 

information. 

Assign a height (z-axis) value to theKeep-in/out. Can be 
entered directly, or in the Keep-in/Keep-out 
Properties dialog box. Refer to the 

 section of Chapter 5, 

, for more information. 

The name of the layer, for example, Copper Top. 

Select Yes to allow trace routing on the layer; select 
No to prevent trace routing on the layer. 

Set the trace bias by selecting Horizontal, Vertical or 
None. 

The type of layer. Choices are Ground, Power, 
Signal or Unassigned. 

The part’s Reference Designator. 

The part’s position on the X axis.

Position Y 

The part’s position on the Y axis.

Side 

The side of the PCB on which the part appears.

The orientation of the part on the PCB.