Справочник Пользователя для National Instruments NI 9144

Use the NI 9915 DIN rail mount kit if you want to mount the chassis on a 
DIN rail. You need one clip for mounting the chassis on a standard 35 mm 
DIN rail. Complete the following steps to mount the chassis on a DIN rail:

1.

Fasten the DIN rail clip to the chassis using a number 2 Phillips 
screwdriver and two M4

× 16 screws. National Instruments provides 

these screws with the DIN rail mount kit. 

Figure 7.  Installing the DIN Rail Clip on the NI 9144 Chassis

2.

Insert one edge of the DIN rail into the deeper opening of the DIN rail 
clip, as shown in Figure 8.

Figure 8.  One Edge of the DIN Rail Inserted in a Clip

1

DIN Rail Clip

2

DIN Rail Spring

3

DIN Rail

2

1

3