Справочник Пользователя для National Instruments NI PCI-6111

© National Instruments Corporation

The following list gives recommended part numbers for connectors that 
mate to the I/O connector on the NI PCI-6110/6111:

•

Honda 68-position, solder cup, female connector 

•

Honda backshell

The NI PCI-6110/6111 is shipped in an antistatic package to prevent 
electrostatic damage to the device. Electrostatic discharge (ESD) can 
damage several components on the device.

Never touch the exposed pins of connectors.

To avoid such damage in handling the device, take the following 
precautions:

•

Ground yourself using a grounding strap or by holding a grounded 
object.

•

Touch the antistatic package to a metal part of the computer chassis 
before removing the device

 

from the package.

Remove the device

 

from the package and inspect the device

 

for loose 

components or any sign of damage. Notify NI if the device

 

appears 

damaged in any way. Do not install a damaged device

 

into the computer.

Store the NI PCI-6110/6111 in the antistatic envelope when not in use.

This section contains important safety information that you must follow 
when installing and using the product.

Do not operate the product in a manner not specified in this document. 
Misuse of the product can result in a hazard. You can compromise the 
safety protection built into the product if the product is damaged in any 
way. If the product is damaged, return it to NI for repair.

Do not substitute parts or modify the product except as described in this 
document. Use the product only with the chassis, modules, accessories, and 
cables specified in the installation instructions. You must have all covers 
and filler panels installed during operation of the product.