Справочник Пользователя для National Instruments NI PXI-1056

This is not available on older SMM code versions.

Configuration of the PXI system is handled through Measurement & 
Automation Explorer (MAX), included on the NI Driver CD-ROM 
packaged with your kit. MAX creates the 

pxisys.ini

 file which defines 

the layout and parameters of your PXI system. After installing the software 
on the NI Driver CD-ROM, the MAX icon will be present on the desktop. 
The configuration steps for single- or multiple-chassis systems are the 
same.

<CR><LF>Commands are 2 letters in length as follows:

<CR><LF>VA - Report the 4 voltages defined as

<CR><LF>

<CR><LF>

<CR><LF>

<CR><LF>

–V1 = +3.3 VDC

–V2 = +5 VDC

–V3 = +12 VDC

–V4 = –12 VDC

<CR><LF>FA - Report the 3 Fan speeds

<CR><LF>SA - All status

<CR><LF>TA - Report the 3 temperature sensors