Справочник Пользователя для National Instruments CFP-2220
© National Instruments Corporation
21
cFP-2200/2210/2220
COM 1
COM 1 is an RS-232 DTE serial port with a standard DB-9 connector.
The Serial VIs access COM 1 as port 0. The following figure shows the
locations of the DB-9 connector pins and Table 1 lists the signals on
the pins.
The Serial VIs access COM 1 as port 0. The following figure shows the
locations of the DB-9 connector pins and Table 1 lists the signals on
the pins.
Figure 25. Controller Serial Port
COM 2 (cFP-2210 and cFP-2220 Only)
COM 2 is an RS-232 DTE serial port with a 10-position modular jack. The
Serial VIs access COM 2 as port 1. Refer to Figure 26 and Table 2 for pin
locations and signal descriptions.
Serial VIs access COM 2 as port 1. Refer to Figure 26 and Table 2 for pin
locations and signal descriptions.
COM 3 (cFP-2220 Only)
COM 3 is an RS-232 DTE serial port with a 10-position modular jack. The
Serial VIs access COM 3 as port 2. Refer to Figure 26 and Table 2 for pin
locations and signal descriptions.
Serial VIs access COM 3 as port 2. Refer to Figure 26 and Table 2 for pin
locations and signal descriptions.
Table 1. DB-9 Pin Descriptions
Pin
Signal
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI
Pin 1
Pin 5
Pin 6
Pin 9