Справочник Пользователя для National Instruments FP-3000

To avoid damaging the FP-3000 and the terminal 

bases, make sure that power is not applied to the FP-3000 
while you install or remove terminal bases.

Follow these steps to install the FP-3000:

1. Use a flat-bladed screwdriver to open the DIN rail clip to the 

unlocked position, as shown in Figure 1.

Figure 1.  DIN Rail Clip

2. Mount the FP-3000 onto a 35 mm DIN rail or onto a panel 

mount accessory.

•

Installing onto a DIN rail: 

a.

Hook the lip on the rear of the FP-3000 onto the top of 
a 35 mm DIN rail and press the FP-3000 down onto the 
DIN rail, as shown in Figure 2. 

Figure 2.  Mounting the FP-3000 onto a DIN Rail

Rail Clip Locked

Rail Clip Unlocked

Cover

Press

35 mm DIN Rail

Lip

Local Bus
Connector