Справочник Пользователя для National Instruments USB-9221
© National Instruments Corporation
13
USB-9201/9221 User Guide and Specifications
Physical Characteristics
If you need to clean the module, wipe it with a dry towel.
Dimensions
With combicon................................ 14.0 cm
× 8.8 cm × 2.5 cm
........................................................ (5.52 in.
× 3.47 in. × 1.00 in.)
25-pin DSUB .................................. 12.6 cm
× 8.8 cm × 2.5 cm
........................................................ (4.95 in.
× 3.47 in. × 1.00 in.)
Screw-terminal wiring............................ 12 to 24 AWG copper conductor
wire with 10 mm (0.39 in.) of
insulation stripped from the end
insulation stripped from the end
Torque for screw terminals .................... 0.5 – 0.6 N · m (4.4 – 5.3 lb · in.)
Weight
USB-9201/9221 with combicon ..... Approx. 250 g (8.8 oz)
USB-9201/9221 with DSUB .......... Approx. 245 g (8.6 oz)
Safety
Maximum Voltage
Connect only voltages that are within these limits.
AI to COM
............................................. ±60 VDC
Isolation Voltages for USB-9201/9221 with Screw
Terminals
Terminals
Channel-to-channel isolation ................. None
Channel-to-earth ground isolation
Continuous ...................................... 250 V
rms
, Measurement
Category II
Withstand ........................................ 2,300 V
rms
, verified by a
dielectric withstand test
Measurement Category II is for measurements performed on circuits
directly connected to the electrical distribution system. This category refers
to local-level electrical distribution, such as that provided by a standard
wall outlet (for example, 115 V for U.S. or 230 V for Europe). Do not use
this module with Measurement Category III or IV voltages.
directly connected to the electrical distribution system. This category refers
to local-level electrical distribution, such as that provided by a standard
wall outlet (for example, 115 V for U.S. or 230 V for Europe). Do not use
this module with Measurement Category III or IV voltages.