Справочник Пользователя для Novatel SMART-AG

This chapter contains instructions and tips to set up your SMART-AG to create a GNSS receiver 
system.

In order for the receiver to perform optimally, the following additional equipment is required:

•

A PC/laptop (user-supplied)

•

A means of communicating with, and powering, the SMART-AG

•

SMART-AG cable (01018256) (included with the receiver Development kit, 
NovAtel part number 01018257, see Figure 3, Simplified SMART-AG Setup on 
Page 21 for COM and power connections

Use a serial COM connection to communicate with the receiver first. 

•

A fused power supply (user-supplied) or other user equipment

Complete these steps to connect and power your SMART-AG. See also Figures 2 to  starting below.

1. Mount the SMART-AG on a secure, stable part of the vehicle (i.e. cab roof) with an unobstructed 

view of the sky from horizon to horizon, see Section 2.1.5, Mounting the SMART-AG on Page 23.

2. Establish a physical communication connection between the SMART-AG and the PC/laptop. 

Connect the COM and Power port on the back of the SMART-AG, see Figure 2 below, to a DB-9 
serial port on a PC, laptop or other data storage device.