Справочник Пользователя для Omron CJ1W-CLK21-V1
236
Remote Programming and Monitoring
Section 7-2
7-2
Remote Programming and Monitoring
A remote PLC can be programmed and monitored across a network from a
Programming Device connected to a PLC.
Programming Device connected to a PLC.
7-2-1
Local Networks
SYSMAC Support Software and CV Support Software
A Programming Device connected to a C200HX/HG/HE, CVM1, or CV-series
CPU Unit can program and monitor a C200HX/HG/HE, CVM1, or CV-series
PLC on the same network. Programming and monitoring are possible, how-
ever, only for the same type of CPU Unit as the one to which the Programming
Device is connected. For example, if the Programming Device is connected to
a CVM1 or CV-series PLC, you can only program and monitor CVM1 or CV-
series PLCs on the network.
CPU Unit can program and monitor a C200HX/HG/HE, CVM1, or CV-series
PLC on the same network. Programming and monitoring are possible, how-
ever, only for the same type of CPU Unit as the one to which the Programming
Device is connected. For example, if the Programming Device is connected to
a CVM1 or CV-series PLC, you can only program and monitor CVM1 or CV-
series PLCs on the network.
SYSMAC Support
Software
Software
Programming Device
Programming
and monitoring
and monitoring
SYSMAC Support
Software (CVM1 only)
or
CV Support Software
Software (CVM1 only)
or
CV Support Software
Note
A factory automation node computer cannot remotely program or
monitor. The node can only monitor Controller Link Network status.
Controller Link Network
C200HX/HG/HE
Controller Link Network
Programming Device
Programming
and monitoring
and monitoring
CVM1, or CV-series PLC
CVM1, or CV-series PLC
Controller Link
Support Software
Support Software
C200HX/HG/HE