Справочник Пользователя для Nortel Networks NN44200-313
22
CallPilot resource configuration
Table 8
LD 15 - Configuring Integrated Services Digital Network
LD 15 - Configuring Integrated Services Digital Network
Prompt
Response
Notes
REQ
CHG
TYPE
net
CUST
xx
Customer number for CallPilot.
ISDN
YES
NO
Enter NO if NMS is not installed
on the CS 1000 or M1 system.
on the CS 1000 or M1 system.
PNI
xxxxx
Private Network Identifier.
Within one network, use the
same PNI value in LDs 15 and
16. When you interwork with
different networks, enter the
PNI of this CS 1000 or M1
system in LD 15, and the PNI of
the target or remote CS 1000 or
M1 system in LD 16.
same PNI value in LDs 15 and
16. When you interwork with
different networks, enter the
PNI of this CS 1000 or M1
system in LD 15, and the PNI of
the target or remote CS 1000 or
M1 system in LD 16.
The default PNI = 0 prevents
the operations of features such
as NRAG, NACD and NMS.
the operations of features such
as NRAG, NACD and NMS.
HLOC
xxxx
Home Location Code defined in
LD 90.
LD 90.
LSC
xxxx
Local Steering Code defined in
LD 15.
LD 15.
7
To exit the overlay, enter ****.
Tech tip: To view a list of installed packages, enter LD 22 and enter
PRT at the REQ prompt, then PKG. Use the capture text function in
hyperterminal to save a text file of the output.
PRT at the REQ prompt, then PKG. Use the capture text function in
hyperterminal to save a text file of the output.
—End—
Configuring the Route Data Block (LD 16)
Perform the following procedure to configure the Route Data Block.
Step
Action
1
Connect to the PBX.
2
Enter LD 16.
Nortel CallPilot
Quickstart Guide
NN44200-313
01.02
Standard
5.0
19 May 2008
Copyright © 2007-2008, Nortel Networks
.