Справочник Пользователя для Nortel Networks BSG12ew
36
Installation options
NN47928-302
NN47928-302
Installing the BSG8ew/12ew/aw/tw on a desktop or shelf
Use this procedure to install a BSG8ew/12ew/aw/tw on a desktop or shelf.
Prerequisites
•
Obtain the four supplied rubber feet for the BSG8ew/12ew/aw/tw.
Procedure steps
Step
Action
1
If installing the BSG8ew, insert the power supply retention clip.
The BSG12ew/aw/tw uses a different power connector, which does not require
a retention clip.
a retention clip.
2
Attach the four self-adhesive rubber feet to the bottom of the BSG8ew/12ew/aw/
tw by peeling off the paper backing and placing the feet on the unit as indicated
in the following figure.
tw by peeling off the paper backing and placing the feet on the unit as indicated
in the following figure.
3
Position the BSG8ew/12ew/aw/tw on a desktop or shelf. Make sure you leave
enough space around the unit for ventilation and access to the cables.
enough space around the unit for ventilation and access to the cables.
4
Install the power supply next to the BSG8ew/12ew/aw/tw.
The power supply must be within 1.5 m (5 feet) of the BSG8ew/12ew/aw/tw
sand within 1.5 m (5 feet) of the AC power outlet.
sand within 1.5 m (5 feet) of the AC power outlet.
End
Attach feet here