Справочник Пользователя для Nortel Networks Option 11C
European Digital telephones: 3110, 3310, and 3820
Page 333 of 544
120 V transformer The following minimum specifications must be met by
this transformer:
this transformer:
240 V transformer The following minimum specifications have to be met by
this transformer:
this transformer:
Note 1: You cannot wall mount the telephone over the wall jack when
using a transformer because of the size of the RJ-11 adapter. Hang it
above or to the side of the jack and run the line and power cords to it.
using a transformer because of the size of the RJ-11 adapter. Hang it
above or to the side of the jack and run the line and power cords to it.
Note 2: The above-mentioned transformers can also be used with
outlets identified as 110V or 220V.
outlets identified as 110V or 220V.
Closet Power Supply
Closet power can be obtained from an AC transformer for loops of 100 ft.
(30 m) or less, or a DC transformer for loop lengths of 650 ft. (198 m) or less.
An equivalent power source can be used but must be UL listed to provide
isolation of outputs to the terminal. See “Closet power supply configuration”
on page 305.
(30 m) or less, or a DC transformer for loop lengths of 650 ft. (198 m) or less.
An equivalent power source can be used but must be UL listed to provide
isolation of outputs to the terminal. See “Closet power supply configuration”
on page 305.
Input voltage
120 Vac/60 Hz
No load output voltage
29 Vac maximum
Voltage at rated current
26.7 Vac minimum
Rated load current
700 mA
Input voltage
240 Vac/50 Hz
No load output voltage
29 Vac maximum
Voltage at rated current
26.7 Vac minimum
Rated load current
700 mA
CAUTION
When using closet power, do not plug the TELADAPT connector into
any equipment other than the Meridian digital telephone, as damage to
equipment may result.
any equipment other than the Meridian digital telephone, as damage to
equipment may result.