Справочник Пользователя для Omron CJ1W-EIP21
139
Setting Tag Data Links
Section 6-2
4.
You can change tag set names in this dialog box. To confirm a change, click
the OK Button in the dialog box.
the OK Button in the dialog box.
5.
Perform steps 1 to 3 for all the devices that will perform tag data links.
3. Importing Network Symbols That Were Registered to Tags with the Network
Configurator to the CX-Programmer
Configurator to the CX-Programmer
If the CJ2H-CPU6
@
-EIP or CJ2M-CPU3
@
is used, you can specify network
symbols for tags using the Network Configurator. The procedure to import net-
work symbols that were created using the Network Configurator into the CX-
Programmer is described below.
work symbols that were created using the Network Configurator into the CX-
Programmer is described below.
Exporting Tags and Tag Sets with the Network Configurator
1,2,3...
1.
Select To/From File - Export to file on the Tag Sets Tab Page in the Edit
Device Parameters Dialog Box to export the tag and tag set information to
a CSV file.
Device Parameters Dialog Box to export the tag and tag set information to
a CSV file.