Справочник Пользователя для Nortel Networks Option 11C Mini
Page 316 of 332
Appendix B – Changing preprogrammed data
553-3021-209
Standard 3.00
April 2000
Changing the default numbering plan
Extensions assigned are different from the default numbering
plan
plan
Compare the first digits assigned to this system with the default numbering
plan.
plan.
•
If the first digit is in the range that is not in use, change the first number
in the default numbering plan. To make this change, follow the
instructions in “Changing the first number in the numbering plan” on
page 316.
in the default numbering plan. To make this change, follow the
instructions in “Changing the first number in the numbering plan” on
page 316.
•
If Meridian Mail Mini, trunk routes, or other data are using the first digit,
you must remove the conflicting data. Follow the instructions found in
“Removing numbering plan conflicts” on page 320.
you must remove the conflicting data. Follow the instructions found in
“Removing numbering plan conflicts” on page 320.
Changing the first number in the numbering plan
To change the first number in the numbering plan perform the following
procedure:
procedure:
Procedure 44
Changing the first number in the numbering plan
Changing the first number in the numbering plan
1
Lift the handset of the administration telephone.
2
Enter the administration Flexible Feature Code.
3
Enter the administration telephone password.
4
You hear special dial tone and the prompt “TASK?” appears on the top
line of the character display.
line of the character display.
5
Press the asterisk (*) three times.
The second line of the character display reads “4 INSTALLATION
OPTIONS'”.
OPTIONS'”.