Справочник Пользователя для Fortinet IPS

IPS sensor overrides:

To configure a filter, go to Intrusion Protection > IPS Sensor. Select the Edit icon 
of the IPS sensor containing the filter you want to edit. When the sensor window 
opens, select the Edit icon of the filter you want to change, or select Add Filter to 
create a new filter. Enter the information as described below and select OK.

After selecting this icon, enter the destination position in the window 

that appears, and select OK.

View Rules icon Open a window listing all of the signatures included in the filter.

Select to create an override based on a pre-defined signature.

Select to create an override based on a custom signature.

Current position of each override in the list.

The name of the signature.

The status of the override. A green circle indicates the override is 

enabled. A gray circle indicates the override is not enabled.

The logging status of the override. A green circle indicates logging is 

enabled. A gray circle indicates logging is not enabled.

The action set for the override. The action can be set to pass, block, or 

reset.

Delete or edit the filter.