Справочник Пользователя для Nortel Networks 608(WL)
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
91
3.5.8 Connection Profiles Page
Connection Profiles
page layout
The Connection Profiles page bundles all parameters that define an IPSec
Connection to a Peer. In other words it bundles the Phase 2 parameters.
Connection to a Peer. In other words it bundles the Phase 2 parameters.
A number of parameters makes use of symbolic descriptors that are defined and
managed on other sub-pages. On the Profiles page, these descriptors are selected
by their symbolic name from a list. Therefore, you need to prepare the descriptors
in other Connections sub-pages, before a complete Connection Profile can be
composed in the Connection Profiles page.
managed on other sub-pages. On the Profiles page, these descriptors are selected
by their symbolic name from a list. Therefore, you need to prepare the descriptors
in other Connections sub-pages, before a complete Connection Profile can be
composed in the Connection Profiles page.
Connection name
Give the connection a symbolic name. This name only has local significance inside
the SpeedTouch™. This parameter is not used in the IPSec negotiations with the
remote Security Gateway.
the SpeedTouch™. This parameter is not used in the IPSec negotiations with the
remote Security Gateway.
Peer name
Select from the list the name of the peer you want to connect to.