Справочник Пользователя для Gateway PLE-310
18
Chapter 1: Setting Up Your Powerline Adapter
www.gateway.com
6
Type a name for your workgroup in the
Workgroup
box.
Use a workgroup name of up to 15 characters with no
blank spaces. The workgroup name must be the same
for all computers in your network workgroup, and the
name must be different than any computer name on
your network.
blank spaces. The workgroup name must be the same
for all computers in your network workgroup, and the
name must be different than any computer name on
your network.
7
Click
OK
to close the Identification Changes dialog box.
8
Click
OK
to close the System Identification dialog box.
9
After you name each computer and assign it to your
workgroup, go to “Step 3: Configuring the TCP/IP
protocol” on page 20.
workgroup, go to “Step 3: Configuring the TCP/IP
protocol” on page 20.
Naming the computers and the workgroup in
Windows 98SE or Windows Me
Windows 98SE or Windows Me
To identify a Windows 98SE or Windows Me
computer on the network:
1
Click
Start
,
Settings
, then click
Control Panel
.
The
Control Panel window opens.
2
If you are using Windows Me, click
view all Control Panel
options
.
3
Double-click the
Network
icon. The Network dialog box
opens.