Листовка для Liebert Web Card

• Locate the Intellislot option bay on your Liebert equipment—You 

might need to remove a plastic cover.

• Insert the IntelliSlot Web Card into the Intellislot bay.
• Secure the card with the supplied screws.
• Connect an Ethernet cable.

DHCP: The card ships with DHCP service enabled. The MAC 

address is printed on a sticker affixed to the top of the card.

Static IP: To assign a static IP address, use the 

Service Terminal to configure the card. Proceed 

to Steps 2 & 3.

• Locate the blue serial configuration cable (null 

modem) that shipped with the card.

• Connect the configuration cable to the DB-9 port 

on the card and to a COM port on your PC.

• Use terminal emulation software, 

such as HyperTerminal

™

, to open a 

direct connection to the card.

• Press Enter for the Main Menu, 

above right.

• Select option 2 and follow the 

instructions to enter an IP 

ADDRESS, NETMASK and GATE-

WAY.

• Press Esc to return to the Main 

Menu.

• Enter X and press Enter to exit 

HyperTerminal and save your changes.

Baud Rate:

9600

Data Bits:

8

Parity:

None

Stop Bits:

1

Flow Control: None