Справочник Пользователя для Edimax Technology EW-7728In
59
Setting...
Click this button to select the WMM data type
which will suppress the function of power
saving. When this kind of data is transferring,
power saving function will be disabled.
Available data types are AC_BK (Background /
Low Priority), AC_BE (Best Effort), AC_VI
(Video First), and AC_VO (Voice First).
which will suppress the function of power
saving. When this kind of data is transferring,
power saving function will be disabled.
Available data types are AC_BK (Background /
Low Priority), AC_BE (Best Effort), AC_VI
(Video First), and AC_VO (Voice First).
Direct Link
Enable or disable direct link setup (DLS)
function.
function.
Setup Enable
This function will greatly improve the data
transfer rate between WMM-enabled wireless
devices. Please click ‘Apply’ button on the right
of this check box after you check or uncheck
this box, so corresponding settings in this
window will be activated or deactivated
respectively.
transfer rate between WMM-enabled wireless
devices. Please click ‘Apply’ button on the right
of this check box after you check or uncheck
this box, so corresponding settings in this
window will be activated or deactivated
respectively.
MAC Address
Input the MAC address of another
WMM-enabled
wireless device you wish to establish a direct
link here, then click ‘Apply’ to add this MAC
address to DLS address table.
WMM-enabled
wireless device you wish to establish a direct
link here, then click ‘Apply’ to add this MAC
address to DLS address table.
Timeout Value
Input the timeout value of this WMM-enabled
direct
link wireless device. If the wireless
device is not responding after this time, it will be
removed from DLS table.
removed from DLS table.
Tear Down
If you want to remove a specific wireless device
from DLS table, select the device and click this
button to remove it.
from DLS table, select the device and click this
button to remove it.
After you finish the settings, click ‘OK’ to close configuration utility.