Справочник Пользователя для Raritan Computer II
C
HAPTER
7: C
ONFIGURATIONS
61
Redundant Configuration
The procedure outlined below must be followed to ensure this configuration functions properly:
The procedure outlined below must be followed to ensure this configuration functions properly:
−
After installation, all UMT Matrix Switches should undergo a FUNC reset to clear the switch
database. This procedure should be performed starting from the third tier device down to the base
unit.
database. This procedure should be performed starting from the third tier device down to the base
unit.
−
Execute the FUNC reset in the following order: UMT-3A
→
UMT-3B
→
UMT-2A
→
UMT-2B
→
UMT-Base 1
→
UMT-Base 2.
−
Whenever a third tier UMT Matrix Switch is replaced, all of the second tier and base UMT Matrix
Switches should undergo a FUNC reset.
Switches should undergo a FUNC reset.
−
Whenever a second tier UMT Matrix Switch is replaced, all of the base UMT Matrix Switches
should undergo a FUNC reset.
should undergo a FUNC reset.
−
Whenever a base UMT Matrix Switch is replaced, only the new UMT Matrix Switch should
undergo a FUNC reset.
undergo a FUNC reset.
Figure 56 Redundant Configuration
UST
UST
UMT-3A
UMT-3B
UMT-2A
UMT-2B
UMT-Base1
UMT-Base2
UST
UST