Справочник Пользователя для Quantum Audio PX502
PX502 Tape Library Quick Start Guide
2
Choosing a Location
0
When choosing an installation site for the PX502, consider
the following requirements:
•
the following requirements:
•
•
Rack Space Requirements
0
contains the rack requirements for the PX502 tape
library.
Table 1 Rack Requirements
Environmental Conditions
0
The installation site must have the following environmental
conditions:
•
conditions:
•
Humidity: 20%-80% non-condensing
•
Temperature: 10°C-35°C (50°F-95°F)
•
Altitude: -500 to 10,000 feet (-152 to 3048 meters)
These environmental conditions apply when the PX502 tape
library is in operation.
library is in operation.
Preparing for the Installation
0
Before you begin the installation procedure in this section,
make the following preparations as described in this
section:
•
make the following preparations as described in this
section:
•
•
Dimensions
PX502
Depth
31 in (78.7 cm)
Width
19 in (48.3 cm)
Height
6.75 in (17 cm), 4U
Weight
52 lbs (23.6 kg)
Air Clearance
Open 4 in (10 cm) behind unit
for proper air flow
N
OTE
: For additional specifications, refer to the
Quantum PX500 Series User’s Guide
(PN 81-
81290)
Providing Necessary Tools
0
Provide the following tools for unpacking and installing the
PX502 tape library:
•
PX502 tape library:
•
#1 PHILLIPS® screwdriver
•
#2 PHILLIPS screwdriver
•
#1 flat blade screwdriver
•
Allen wrench (2.5mm and 3mm) included in accessory
kit
kit
•
Antistatic wrist strap included in accessory kit
Taking ESD Precautions
0
Some components within the PX502 tape library contain
static-sensitive parts. To avoid damaging these parts while
performing installation procedures, always observe the
following precautions:
•
static-sensitive parts. To avoid damaging these parts while
performing installation procedures, always observe the
following precautions:
•
Keep the PX502 turned off during all installation
procedures.
procedures.
•
Use an antistatic wrist strap (included in the accessory
kit).
kit).
•
Keep static-sensitive parts in their original shipping
containers until ready for installation. Look for the ESD
sticker to identify static sensitive parts.
containers until ready for installation. Look for the ESD
sticker to identify static sensitive parts.
•
Avoid touching connectors and other components.
Unpacking the PX502 Tape Library
0
This section explains how to unpack the PX502 tape library
and move it to its final installation location.
and move it to its final installation location.
N
OTE
: Dry climates and cold-weather heating
environments have lower relative humidity and
are more likely to produce static electricity.
are more likely to produce static electricity.
N
OTE
: Inspect the outer library packaging for damage. If
there is any damage evident on the library
packaging, do not continue with the installation
and contact Quantum customer support.
packaging, do not continue with the installation
and contact Quantum customer support.