Справочник Пользователя для Promise Technology 150TX2
FastTrak S150 TX2plus User Manual
10
FastBuild (tm) Utility 2.xx
(c) 2002-2005 Promise Technology, Inc.
[Auto Setup Options Menu]
Optimize Array for:
Performance
[ Auto Setup Configuration ]
Mode ....................................................................... Stripe
Spare
Drive ............................................................. 0
Drives used in Array ................................................ 2
Array Disk Capacity................................................. 160048
[ Keys Available ]
[↑] Up [↓] Down [←, →, Space] Change Option [ESC] Exit [Ctrl-Y] Save
Creating a Performance Array
Use this setting to create a Striped (RAID 0) array. FastTrak S150 TX2plus
enables you to create striped arrays with 1, 2, 3, or 4 drives. These arrays have
no fault tolerance.
enables you to create striped arrays with 1, 2, 3, or 4 drives. These arrays have
no fault tolerance.
To create an array for best performance, follow these steps:
1. Press the Spacebar to choose Performance under the Optimize Array for
section.
2. Press Ctrl-Y to Save and create the array.
3. Reboot your system.
4. Once the array has been created, you will need to FDISK and format the
3. Reboot your system.
4. Once the array has been created, you will need to FDISK and format the
array as if it were a new single hard drive.
5. Once the arrayed drives have been formatted, proceed to Chapter 4 of this
Manual to install your operating system and/or FastTrak driver.