Справочник Пользователя для RAD Data comm IPmux-1E

Inband TFTP Download Procedure

D-1

Appendix D
TFTP Download Procedures

D.1 Inband TFTP Download Procedure

General

New IPmux-1/1E software version can be downloaded to the IPmux-1/1E using

TFTP. There are three possible procedures:
• Users who access IPmux using Telnet can perform software download and

configuration upload/download using the configuration screens. For details,
see Download/Upload using TFTP (see Appendix E).

• Users who have access to the RADview Network Management – for more

details refer to RADview-HPOV Network Management System for IP

Applications.

• Users who access a MIB browser – the TFTP downloading procedure is

illustrated in Figure D-1.

IPmux-1

IP 192.168.113.5

IPdata

NMS Server
IP 192.168.113.2

IP
Network

Figure D-1. TFTP Downloading Procedure

The IPmux-1 manager station must be equipped with a TFTP server and the

new software.

The procedures in this chapter should be performed only by a UNIX expert.

➤

To start download:
1. Set the appropriate IPmux-1/1E MIB parameter. IPmux-1/1E then sends

requests to the TFTP server (where the new software resides) and receives
packets of data.

2. If there is no TFTP server available to the main manager, assign a station where

there is a TFTP server installed. This server becomes a secondary manager. In
this case, the main manager only initiates the download process (by setting the

MIB parameter), which is then performed between IPmux-1/1E and the
TFTP server.

Warning

Order from: Cutter Networks

Ph:727-398-5252/Fax:727-397-9610