Листовка для Zhone Technologies IPD 12000E

✓

✓

✓

✓

✓

✓

✓

Video Ready, High-capacity Ethernet-based Modular Multi-Service
Broadband Loop Carrier for large scale Central Office DSL
deployments

Zhone's IPD12000E Broadband Loop Carrier (BLC) provides a high capacity, native IP Ethernet

platform for the feature rich multi-service access multiplexer modules in the IPD family.

The IPD12000E is engineered for efficient, high-speed IP data transport in a compact, fault-tolerant

chassis. Supporting high-density Active Ethernet, ADSL2+, SHDSL, extended-rate SHDSL.bis, and

T1/E1 access modules, the Ethernet-based IPD12000E is the optimal line aggregation platform for

today's advanced IP-based access networks. Incumbents, Competitive Operators, and Internet Service

Providers are able to cost-effectively offer the full range of today's advanced IP-based services, such as

high-speed broadband Internet and IP video. Most importantly, these services can be delivered over a

pure IP network without a dependency on ATM.

The IPD12000E features a high capacity backplane, delivering up to 2 Gbps throughput to each of the

12 access slots, and up to 16 Gbps upstream from a pair of Broadband Services Switch 8000 uplink

cards. Dual 50-pin, RJ-21 connectors are provided for every slot so that the chassis can support higher

port density modules in any access slot. High port density modules include a 48-port ADSL2+, a

48-port SHDSL.bis, and 24-port, 4-wire T1 and E1 modules. For mission-critical, high speed data

applications, the IPD12000E offers survivable network topologies by means of Ethernet Automatic

Protection Switching (EAPS) rings and BSX8000 uplink card-level redundancy options.

Managing all of these high-speed services could not be simpler with the availability of a full range of

local and remote management options, including an integrated Web GUI, SNMP, and Command Line

Interface (CLI). All of the Access Modules offer simple, 'Plug & Play' operation, with the system

configuring each port automatically and without intervention. When more sophisticated bandwidth

management functionality is desired, the IPD supports Zhone's complete Multi-media Traffic

Management (MTM) feature set, giving system operators the ability to prioritize traffic based on DSCP,

IP address ranges, MAC address ranges, and VLAN ranges. Rate limiting features and 802.1p priority

also ensure that specific applications are given appropriate priority and bandwidth allocation

throughout the system, while marking packets for appropriate VLAN and QoS management by

upstream network devices. 

The IPD12000E supports up to two BSX8000-5 (Broadband Switch Modules ) uplink cards, each

operating in simplex mode or a pair of BSX8000-5R cards operating in redundant mode. Each BSX8000

switch card supports four (4) Gigabit uplink ports, and has provisions for an optional MIM (Micro

Interface Module), allowing the IPD to integrate easily into a variety of network designs. A variety of

MIM types are available, including: 10/100 Ethernet; 100 Mbps fiber; 2 x T1/E1; 4 x T1/E1; and either

2- or 4- Gigabit Ethernet ports using either copper or fiber Small Form Factor Pluggable modules. 

For installation flexibility, the IPD12000E is only 9-rack units high, and has removable mounting

brackets that can be placed in increments of 1.45” up to 9.28” from the front of the chassis, allowing

for multiple installation options in either 19" or 23" equipment racks.