Справочник Пользователя для Promise Technology 66 Pro
SuperTrak66™ User's Manual
Chapter 2
- 6 -
SuperTrak66 Controller Card
Seen in Figure 1, the SuperTrak66 controller card has several physical features of
interest for purposes of installation: A SIMM socket for EDO memory (minimum
8MB required), 4 IDE channel connections (1 “master” drive per channel), an alarm
buzzer, a battery, and 4 LEDs on the card’s backplane.
interest for purposes of installation: A SIMM socket for EDO memory (minimum
8MB required), 4 IDE channel connections (1 “master” drive per channel), an alarm
buzzer, a battery, and 4 LEDs on the card’s backplane.
NOTE: The SuperTrak66 controller card, like every other valuable part of your PC,
is sensitive to static electricity. Be sure that you are properly grounded (Promise
recommends that you wear an anti-static strap, or place a free hand on a grounded
object), and that your PC is unplugged before installing any of the SuperTrak66
components.
is sensitive to static electricity. Be sure that you are properly grounded (Promise
recommends that you wear an anti-static strap, or place a free hand on a grounded
object), and that your PC is unplugged before installing any of the SuperTrak66
components.
Battery
Alarm
Onboard CPU
UDMA/66
ASIC
IDE channels
EDO Simm Slot
LEDs
Figure 1: SuperTrak66 controller card
Cables
Ultra ATA/66 drive cables are provided with the SuperTrak66 controller card. These
cables must be used with Ultra ATA/66 drives in order to realize full Ultra ATA/66
specs. They differ from older 40-wire/40-pin IDE cables by adding an extra ground
wire between each data wire, resulting in an 80-wire/40-pin cable.
cables must be used with Ultra ATA/66 drives in order to realize full Ultra ATA/66
specs. They differ from older 40-wire/40-pin IDE cables by adding an extra ground
wire between each data wire, resulting in an 80-wire/40-pin cable.