Справочник Пользователя для Promise Technology 66 Pro
SuperTrak66™ User's Manual
Chapter 4
- 42 -
Array Administration
Array administration is the ability to create, view, modify and delete arrays. The
ability to view the status of an array through the utility allows identification of
problems which may require user intervention to prevent the array from going down
or to restore fault tolerance.
NOTE: Actual maintenance of the array (deleting, rebuilding, creating, etc…) may
be performed only from the system housing the SuperTrak array for security
reasons. SuperTrak greys out the maintenance functions for monitoring stations.
The I/O information (IOP or Controller) subpanes (see page 84) of SuperCheck
allow you to see that all drives are functioning correctly. If any drive has failed,
SuperCheck will indicate which drive(s) has failed. You also can see the array
status to determine if it is functioning, or if it requires critical attention, or if it has
begun an automatic rebuild, etc. The array page allows modification of the cache
settings for fine-tuning your server’s performance. The enclosure pane allows you
to verify that the drives are operating within temperature specification, and that the
enclosure cooling fans are operational.
NOTE: Never delete an array unless you have backed up all data which is needed
on the array. It may be possible to restore access to an array after the deletion by
re-creating the array exactly as it was defined previously. Though the product allows
for this procedure, Promise does not recommend it.
ability to view the status of an array through the utility allows identification of
problems which may require user intervention to prevent the array from going down
or to restore fault tolerance.
NOTE: Actual maintenance of the array (deleting, rebuilding, creating, etc…) may
be performed only from the system housing the SuperTrak array for security
reasons. SuperTrak greys out the maintenance functions for monitoring stations.
The I/O information (IOP or Controller) subpanes (see page 84) of SuperCheck
allow you to see that all drives are functioning correctly. If any drive has failed,
SuperCheck will indicate which drive(s) has failed. You also can see the array
status to determine if it is functioning, or if it requires critical attention, or if it has
begun an automatic rebuild, etc. The array page allows modification of the cache
settings for fine-tuning your server’s performance. The enclosure pane allows you
to verify that the drives are operating within temperature specification, and that the
enclosure cooling fans are operational.
NOTE: Never delete an array unless you have backed up all data which is needed
on the array. It may be possible to restore access to an array after the deletion by
re-creating the array exactly as it was defined previously. Though the product allows
for this procedure, Promise does not recommend it.
Changing the cache settings will directly affect performance of an array. One way
of determining the cache settings which are appropriate for your SuperTrak66 is to
use a benchmarking utility. Such a utility stresses the array in a manner
consistent with expected typical workload for the array. Choose a configuration that
yields the best performance results. It is difficult to make any solid
recommendations for cache settings since the array workload will differ from
system to system depending on its application.
of determining the cache settings which are appropriate for your SuperTrak66 is to
use a benchmarking utility. Such a utility stresses the array in a manner
consistent with expected typical workload for the array. Choose a configuration that
yields the best performance results. It is difficult to make any solid
recommendations for cache settings since the array workload will differ from
system to system depending on its application.
Setting Up Email Notification
SuperCheck allows the administrator or user to check on array status at anytime.
You can also set up e-mail notification so that SuperCheck will notify you of any
problems via e-mail messaging services. The notification feature is recommended
for any type of array which is to be accessible over a network.
You can also set up e-mail notification so that SuperCheck will notify you of any
problems via e-mail messaging services. The notification feature is recommended
for any type of array which is to be accessible over a network.
NOTE: E-mail alert notification is Message Agent-based, not array-based. You will
receive e-mail notification for problems related to all arrays connected under the
Message Agent.
The e-mail alert notification may be adjusted for each Message Agent to only send
messages for a particular list of events. The administrator can add or remove
events from the e-mail alert notification as desired.
receive e-mail notification for problems related to all arrays connected under the
Message Agent.
The e-mail alert notification may be adjusted for each Message Agent to only send
messages for a particular list of events. The administrator can add or remove
events from the e-mail alert notification as desired.