Справочник Пользователя для Renesas R0E530640MCU00

R0E530640MCU00 User’s Manual 

5. Debugging Functions 

REJ10J1733-0100  Rev.1.00  Apr. 01, 2008 
Page 135 of 229 

 

 

 
 
5.9.9  Filtering Trace Information 
Use the filter function to extract only the necessary records from the acquired trace information. The filter function filters the 
trace information in software that was acquired by hardware. 
Unlike the “Capture/Do not Capture conditions” where you set acquisition conditions before getting trace information, this 
function permits you to change filter settings for the acquired trace information any number of times. 
Therefore, the necessary information can be extracted easily, with data analysis significantly facilitated.   
The filter function does not affect the trace memory, so that its content remains intact.   
The filter can be used when the selected trace mode is Fill until stop, Fill until full or Fill around TP and the selected display 
mode is Bus or Disassembled. 
 

(1) Auto-filter function 

To use the filter function, choose Auto Filter from the context menu of the Trace window. When Auto Filter is turned on, each 

column of the Trace window is marked with an auto-filter arrow [

]. 

Click any arrow [

] and select the necessary condition from the ensuing drop-down list. That way, you can easily filter the 

records to get those that meet the condition. Selecting Option in the drop-down list brings up the Option dialog box. In this 
dialog box, you can set detail conditions. 

Some columns such as Address and Data have only Option provided in the drop-down list because they do not have other 
inherent items. Selecting All returns you to a non-filter state. 
 

 

Figure 5.61 Trace window 
 
 
If after filtering records in bus display mode you switch to disassemble-only or source-only display, Auto Filter is deselected. 
Similarly, when after filtering records in disassembled display mode you switch to bus-only or source-only display, Auto Filter 
is deselected.