Справочник Пользователя для Renesas R0E530640MCU00

Скачать
Страница из 229
R0E530640MCU00 User’s Manual 
1. Outline 
REJ10J1733-0100  Rev.1.00  Apr. 01, 2008 
Page 20 of 229 
 
 
 
 
1.4 Specifications 
Table 1.5 lists the specifications of the R0E530640MCU00. 
 
Table 1.5 Specifications of the R0E530640MCU00 
Applicable MCU 
M16C/60 Series M16C/64 Group MCUs with 512 KB ROM 
Applicable MCU mode 
Single-chip mode, memory expansion mode, microprocessor mode 
Maximum ROM/RAM capacity 
1. Internal flash ROM: 8KB+16KB+512KB 
0E000h--0FFFFh, 10000h--13FFFh, 80000h--FFFFFh 
2. Internal RAM: 31KB 
00400h--07FFFh 
Maximum operating frequency 
Power supply voltage: 2.7--5.5V 25MHz (with PLL) 
(Emulation memory    0wait: 12MHz, 1wait or more: 25MHz) 
Software break 
4096 points (uses RAM for break point capability before execution) 
Hardware break 
16 points (Execution address, bus detection, interrupt, external trigger signal) 
Combination, pass count 
- Cumulative AND/OR/status transition 
- 255 pass counts 
Exception event detection 
Violation of access protection/task stack access violation/OS 
dispatch/initialization omitted 
Real-time trace 
192bits × 4M cycles 
(Address, data, status, CPU status, bus status, target status, task ID, time stamp, 32 
external trigger inputs) 
Trace mode 
Fill until stop/full/point and delay/repeat (free)/repeat (full) 
Trace extract/delete 
Capture/Do not Capture by events 
or 
Specified data access instruction extraction/trace extraction before and after point 
Real-time RAM monitor 
- 16,384 bytes (512 bytes × 32 blocks) 
- Data/last access 
Time measurement 
- Execution time between program start and stop 
- Maximum/minimum/average execution time and pass counts of specified eight 
sections 
- Count clock: Equal to MCU Clock or 10ns—1.6us 
Coverage measurement 
2 MB (256 KB × 8 blocks) 
Profile 
1 MB (128 KB × 8 blocks) 
Connection to user system 
100-pin 0.65mm pitch QFP 
R0E0100TNPFJ00 
 
100-pin 0.5mm pitch LQFP 
R0E0100TNPFK00 
Emulator power supply 
Supplied from included AC adapter (power supply voltage: 100--240 V, 50/60 Hz)