Справочник Пользователя для RCA 300 Series
4 SpeedTouch™ Diagnostics
E-SIT-CTC-20030702-0003 v4.0
46
4.2.1 The Diagnostics Application for MS Windows
Opening the Diagnostics
window
Double-click the SpeedTouch™ Status icon in the status area to open the Speed-
Touch™ Diagnostics window.
Touch™ Diagnostics window.
Note
You can also access the SpeedTouch™ Diagnostics via Start > (All) Programs
> SpeedTouch™ USB > SpeedTouch™ USB Diagnostics.
> SpeedTouch™ USB > SpeedTouch™ USB Diagnostics.
Diagnostics window
Opening the SpeedTouch™ Diagnostics, pops up the following window:
Note
In the example the Diagnostics window applies to a PPP (PPPoA or PPPoE)
installation. For an RFC1483 installation the title bar will mention RFC1483.
installation. For an RFC1483 installation the title bar will mention RFC1483.
Left box figures
In the left box, the following figures can be displayed:
Figure
Indicator
Description
Flashing red square
Your SpeedTouch™ is not (properly)
connected to your PC, or malfunctioning.
connected to your PC, or malfunctioning.
Note
To solve the problem,
(re)connect your Speed-
Touch™ to the PC.
(re)connect your Speed-
Touch™ to the PC.
Flashing yellow square
Your SpeedTouch™ is connected to your
PC, and the modem software is loaded,
but your ADSL link is not synchronized
(yet).
PC, and the modem software is loaded,
but your ADSL link is not synchronized
(yet).
Flashing green square
Your SpeedTouch™ has established ADSL
link synchronization.
link synchronization.