Справочник Пользователя для Renesas M30100T3-RPD-E

Before turning the power ON, check the connections of the PC4701, emulation pod, pod probe,
converter board and target system.

• Turn on the power of the emulator and target system as simultaneously as possible.

• Turn off the power of the emulator and target system as simultaneously as possible.

• Do not leave either the emulator or target system powered on, because of leakage current the

internal circuits may be damaged.

• When turning on the power again after shutting off the power, wait about 10 seconds.

• The emulator's pin V

CC

 is connected to the target system in order to monitor target

system voltage. For this reason, the emulator cannot supply power to the target
system. Therefore, provide the target system with a separate power supply from that
of the emulator.

• Keep target system power supply voltage within the MCU's specified range (2.7 to

5.5 V).

• Do not change target system power supply voltage after power has been activated.