Справочник Пользователя для IBM M110

 

39

 
Your first time through you will be prompted: 

 

[You need to configure remote printing] 
Select [OK] 
Select  

àAdd Remote UNIX printer 

 

Enter the name of the remote host:  

 

In this example: spot110_01 

 
NOTE: Do not use the choices from the Select Printer Pop up or it will 
look like the Unix print queues are on the remote host. 
 

--> Enter name of the remote printer: 
 
Use one of the following, depending on which terminal 
port is driving the printer: 
PARALLEL + a unique number 
SERIAL1 + a unique number 
SERIAL2 + a unique number 
DEFAULT + a unique number 

 
For example: DEFAULT_01 
 
When done, select [OK]. 
 
Your printer is now setup. You can check and administer it with the 
standard SCO lprinter commands. For example: 
 
lp -d DEFAULT_01 /etc/hosts 
 
should print the file /etc/hosts on whatever printer the terminal thinks is the 
default printer attached to spot110_01. 
 
The above procedure can also be run from the graphics desktop, where there is 
a utility for print management.