Справочник Пользователя для IBM 243X

nugget

39

You must use an interface cable to connect an input device to the input device
connector. Use the following table to determine which non-decoded input device you
can attach to the 243X and which cable you need:

1550C laser scanner

1550C0501

068424

1553E laser scanner

1550E0603

3-606031-00

1550C high visibility laser scanner

1550C0504

068424

1550C standard range laser scanner

1550C0500

068424

1551C standard range laser scanner

1551C0200

068424

1551E standard range laser scanner

1551E0600

Contact your Intermec
sales representative.

For a list of decoded input devices, contact your Intermec sales representative.

Note: The 243X has two connector module options. The standard connector module
supports non-decoded input devices while the serial connector module supports decoded
input devices. Make sure that you select the appropriate input device for your connector
module. For help, see “Learning About the Connector Modules” in Chapter 1.

Intermec is constantly testing and developing new input devices. For an updated list of
Intermec-approved input devices for the 243X or for help determining which adapter
cable you need, see your Intermec sales representative.

You can use these pin assignments to make your own serial cables or troubleshoot
problems.

The following illustration shows the type of connector and the pin assignments for the
COM1 port.

1-TXD

3-GND

RTS-4

5-CTS

Charge in 
(12 VDC)-6

RXD-2

243XU036.eps