Справочник Пользователя для IBM 19K5716

IBM ISDN PC Card:User’s Guide

You can rename the modified connection if desired. You are now ready to connect 
to your Internet Service Provider over two ISDN B channels simultaneously.

In order to be able to use CompuServe with your IBM International ISDN PC 
Card, you must have cFos installed, unless you only plan to use CompuServe 
2000 on your system. In this case, you may not need to install cFos at all.
Please ask your local CompuServe help desk what communication protocol is 
used for dial-in. In Europe the X.75 protocol is widely used.

IBM has tested the CompuServe 3.0 and higher access software under Windows 
95, 98 and ME, and CompuServe 4.0.x and higher access software under Windows 
NT 4.0 and Windows 2000 Professional.

 The screen shots in this section may vary somewhat from the user 
interface you see on your screen.

Before you can use CompuServe 3.0 or any non-CAPI 2.0-compliant CompuServe 
access software, you must configure cFos for use with it by installing either the 
“cFos ISDN, X.75, Defaults, Mailbox Settings” or the “cFos ISDN, CompuServe” 
modem emulation on any available COM port.

ISDNmst.fm  Page 104  Wednesday, January 15, 2003  9:22 AM