Справочник Пользователя для IBM 19K5716
12. Using NDIS
163
3. A device driver with the name “NDIS WAN CAPI Device Driver” is
displayed. Confirm this by clicking OK.
4. The required files are then copied to your hard disk drive. Afterward, the
network configuration window should display at least the following
components:
components:
•
The required files are then copied to your hard disk drive. Afterward, the
network configuration window displays at least the following
components:
network configuration window displays at least the following
components:
•
Network Adapter: Dial-Up Adapter
•
Protocol: NDISWAN / NDIS WAN CAPI Device Driver
5. Now add any network protocols you require, such as TCP/IP, IPX/SPX or
NetBIOS (you will need TCP/IP for the test connection described below).
Check the bindings of the protocol to the dial-up adapter. Remove any
unnecessary protocol bindings. Such changes can also be carried out later.
Check the bindings of the protocol to the dial-up adapter. Remove any
unnecessary protocol bindings. Such changes can also be carried out later.
6. To continue the installation, confirm the settings in the network configuration
window by clicking OK. The ISDN Accelerator Pack's ISDN Configuration
Wizard starts automatically to assist you with the further configuration of the
device driver. Click Next.
Wizard starts automatically to assist you with the further configuration of the
device driver. Click Next.
7. In the next window, select the setting Switch Protocol: Automatic, since the D
channel protocol was already selected during the installation of the ISDN
adapter device driver software, and does not need to be entered again here.
Click Next.
adapter device driver software, and does not need to be entered again here.
Click Next.
8. The next window enables you to assign Multiple Subscriber Numbers (MSNs)
for both Modem Entries of the NDIS WAN CAPI Device Driver, if required, in
the Phone Number field. Confirm your entries by clicking Next.
the Phone Number field. Confirm your entries by clicking Next.
You must assign MSNs if the ISDN adapter is to be used in RAS Server mode,
and other CAPI applications which answer data calls (with the service
indicator DATA64K) are present on your computer. This is necessary to direct
incoming calls to the correct application. The Multiple Subscriber Number
entered is used for both incoming and outgoing calls: you cannot configure
separate incoming and outgoing MSNs. If you need a separate MSN for
outgoing calls, use the ISDN CAPI Port Device Driver or cFos. Subsequent
changes to the MSN setting will only become active after Windows is
restarted.
and other CAPI applications which answer data calls (with the service
indicator DATA64K) are present on your computer. This is necessary to direct
incoming calls to the correct application. The Multiple Subscriber Number
entered is used for both incoming and outgoing calls: you cannot configure
separate incoming and outgoing MSNs. If you need a separate MSN for
outgoing calls, use the ISDN CAPI Port Device Driver or cFos. Subsequent
changes to the MSN setting will only become active after Windows is
restarted.
9. When the ISDN Configuration Wizard has finished, you are prompted to
insert the Windows 95 CD-ROM. If a version conflict is reported for the file
NDIS.VXD
NDIS.VXD
(Windows NDIS 3.1 Wrapper) when copying files from the CD-
ROM, then answer Yes to the question “Do you want to keep this file?” The
file NDIS.VXD that was copied on to your computer by the ISDN Accelerator
Pack v1.1 setup is more recent than the version on the Windows 95 CD-ROM.
file NDIS.VXD that was copied on to your computer by the ISDN Accelerator
Pack v1.1 setup is more recent than the version on the Windows 95 CD-ROM.
10. The installation is then complete. After restarting the computer, the ISDN
Accelerator Pack v1.1 is ready to use in conjunction with the NDIS WAN
CAPI Device Driver for Windows 95.
CAPI Device Driver for Windows 95.
Connections to Internet Service Providers (ISPs)
ISDNmst.fm Page 163 Wednesday, January 15, 2003 9:22 AM