Справочник Пользователя для IBM 19K5716
12. Using NDIS
173
This completes the installation of the network components.
Notes on RAS server configuration in Windows NT Server 4.0
General
This section contains details about certain possible RAS configurations of in
Windows NT and Windows 95. It does not contain details specific to ISDN. If you
have any further questions, please refer to your Windows NT documentation.
These notes are based on the assumption that a Windows 95 remote client
(referred to here as “the remote“) is dialing up a Windows NT server network
(referred to here as “the central site”) over ISDN.
Windows NT and Windows 95. It does not contain details specific to ISDN. If you
have any further questions, please refer to your Windows NT documentation.
These notes are based on the assumption that a Windows 95 remote client
(referred to here as “the remote“) is dialing up a Windows NT server network
(referred to here as “the central site”) over ISDN.
Windows NT server (central site)
The remote client must be able to log on to the LAN. In addition, an NT server
must be installed in the LAN as a Primary Domain Controller (PDC). The remote
client must be registered in the domain as a user (User Manager for Domains).
Extra dial-up rights must be configured for RAS.
must be installed in the LAN as a Primary Domain Controller (PDC). The remote
client must be registered in the domain as a user (User Manager for Domains).
Extra dial-up rights must be configured for RAS.
The RAS server is installed on an Windows NT server equipped with an ISDN
adapter. If necessary, the PDC and RAS can be configured on the same machine.
The RAS port ISDN1 or ISDN2 is installed as described in Section 13.2.1, and
configured to accept incoming calls in Remote Access Setup.
adapter. If necessary, the PDC and RAS can be configured on the same machine.
The RAS port ISDN1 or ISDN2 is installed as described in Section 13.2.1, and
configured to accept incoming calls in Remote Access Setup.
RAS client with Windows 95 (remote)
The ISDN CAPI Port Device Driver for Windows 95 can be installed along with
Dial-Up Networking according to the instructions in the on-line Help. Enter the
following settings in the Control Panel:
Dial-Up Networking according to the instructions in the on-line Help. Enter the
following settings in the Control Panel:
Network/Identification:
•
Workgroup = domain name.
Network/Configuration:
•
Client for Microsoft Networks
•
Properties: Log on to Windows NT domain; enter the name of the NT domain
•
Network log-on options: Quick log-on
•
Dial-Up Networking adapter
•
Network protocol TCP/IP or NetBEUI bound to the Dial-Up Adapter (see
further details in Sections 13.2.2.2 and 13.2.2.3)
further details in Sections 13.2.2.2 and 13.2.2.3)
Use the ISDN RAS or ISDN Internet modem entry for the Dial-Up Networking
connection, and select the server type PPP: Windows 95, Windows NT 3.5,
Internet
connection, and select the server type PPP: Windows 95, Windows NT 3.5,
Internet
.
TCP/IP is a routable network protocol. The public Internet is based on this
protocol. It is also commonly used in LANs and WANs.
protocol. It is also commonly used in LANs and WANs.
Windows NT server (central site)
ISDNmst.fm Page 173 Wednesday, January 15, 2003 9:22 AM