Справочник Пользователя для IBM 19K5716
212
IBM ISDN PC Card:User’s Guide
Removing the IBM ISDN PC Card from Windows 2000
The following section assumes that you are logged on to a Windows 2000 system
as Administrator. If you are not logged on as Administrator, you might not be able
to perform all the steps outlined in this chapter.
as Administrator. If you are not logged on as Administrator, you might not be able
to perform all the steps outlined in this chapter.
To remove the IBM ISDN PC Card from Windows 2000, do the following:
1. Leave the IBM International ISDN PC Card in the PCMCIA slot. Disconnect
the card’s ISDN cable from the ISDN line.
2. Click Start -> Settings -> Control Panel to open the Control Panel.
3. Double-click the Add/Remove Hardware icon.
4. When the Add/Remove Hardware Wizard starts, click Next.
5. In the Choose a Hardware Task window, select the option Uninstall/Unplug a
device
, then click Next.
In the subsequent window click Uninstall a device and then Next.
6. In the device list, select IBM International ISDN PC Card, then click Next.
7. In the Uninstall a Device window, confirm that you want to remove the IBM
International ISDN PC Card. Click Next.
8. Click Finish and then shut down Windows. Switch off your computer if
necessary.
9. Remove the IBM International ISDN PC Card from the PCMCIA slot.
ISDNmst.fm Page 212 Wednesday, January 15, 2003 9:22 AM