Справочник Пользователя для IBM 19K5716

7.   Installing the device drivers in Windows NT 4.0

5. In the Confirm File Deletion window, confirm that you want to remove 

CardWizard for Windows NT by clicking the Yes button. In the next window, 
confirm that you want to remove all files.

6. After the removal of CardWizard has been completed, you are prompted to 

restart your system. Click No, since restarting your system at this point might 
cause problems. Instead, run the current Service Pack installation for your 
Windows NT 4.0 computer.

After the Service Pack has been installed again, your computer will restart. After 
the system has restarted, you can install a newer version of SystemSoft's 
CardWizard for Windows NT or install the device drivers for the IBM 
International ISDN PC Card.

To install the IBM International ISDN PC Card in Windows NT 4.0, proceed as 
follows:

1. Turn off the computer, select a PCMCIA slot and insert the IBM International 

ISDN PC Card into this slot without the ISDN cable attached.

2. Turn your computer back on and insert the CD labeled IBM International 

 into your computer CD-ROM drive.

3. If you have SystemSoft's CardWizard 5.10 or higher installed on your 

notebook computer, the following message might display. Click Exit to close 
this window and continue the installation as described below.

ISDNmst.fm  Page 35  Wednesday, January 15, 2003  9:22 AM