Справочник Пользователя для IBM 19K5716
42
IBM ISDN PC Card:User’s Guide
After restarting, your system is ready for the NDIS WAN device driver
installation.
installation.
Installing the NDIS WAN CAPI drivers
1. Click Start -> Settings -> Control Panel and double-click the Network icon.
2. Click the Adapters tab, then the Add button. In the Select Network Adapter
window, click Have Disk. In the Insert Disk window, type the complete path
to the NDIS device driver location. The NDIS WAN CAPI Drivers are located
on the CD in the directory \WINNT\NDIS. If your CD-ROM drive has the
letter E, for example, enter the path E:\WINNT\NDIS. Then click OK.
to the NDIS device driver location. The NDIS WAN CAPI Drivers are located
on the CD in the directory \WINNT\NDIS. If your CD-ROM drive has the
letter E, for example, enter the path E:\WINNT\NDIS. Then click OK.
3. Click OK again in the Select OEM Option window. In the NDIS WAN CAPI
Driver Properties window you can enter the desired MSNs (Multiple
Subscriber Numbers) of your ISDN line for each B-channel. You might also
leave these fields blank for now and click OK. You can add an MSN setting
later.
Subscriber Numbers) of your ISDN line for each B-channel. You might also
leave these fields blank for now and click OK. You can add an MSN setting
later.
4. After the NDIS WAN CAPI Device Driver installation has completed and you
have clicked OK, Setup starts the Remote Access Setup utility. Click Add and
install the ISDN1 - CAPIWAN device by clicking OK. Repeat this step again to
install the ISDN2 - CAPIWAN device.
install the ISDN1 - CAPIWAN device by clicking OK. Repeat this step again to
install the ISDN2 - CAPIWAN device.
ISDNmst.fm Page 42 Wednesday, January 15, 2003 9:22 AM