Справочник Пользователя для IBM 19K5716
© Copyright IBM Corp. 2002
53
10. Configuration and diagnostics of the IBM
International ISDN PC Card
International ISDN PC Card
Note:
No diagnostics tool is available for Windows 2000 and Windows XP.
This chapter briefly describes how to change the D-channel protocol (also called
the switch type), how to change MSNs, and how to diagnose problems with the
adapter.
the switch type), how to change MSNs, and how to diagnose problems with the
adapter.
When you travel to another country outside Europe, it might be necessary to
change the adapter D-channel protocol, also known as the switch type. The IBM
International ISDN PC Card supports the following D-channel protocols:
change the adapter D-channel protocol, also known as the switch type. The IBM
International ISDN PC Card supports the following D-channel protocols:
•
Euro-ISDN (DSS1)
•
NI-1
•
5ESS
Euro-ISDN is used all over Europe, Australia and New Zealand. NI-1 and 5ESS
are North American switch types.
are North American switch types.
Note:
In the United States of America, Canada, Australia, or New Zealand, the
IBM International ISDN PC Card cannot be connected directly to the ISDN
line. To use this adapter in these countries, an NT1 adapter is required to
convert the U interface provided in these countries to the S/T interface
used in Europe.
IBM International ISDN PC Card cannot be connected directly to the ISDN
line. To use this adapter in these countries, an NT1 adapter is required to
convert the U interface provided in these countries to the S/T interface
used in Europe.
Make sure that you purchase an NT1 adapter with the capability to convert the U
interface to a S/T interface.
interface to a S/T interface.
Changing the switch type in Windows 95, Windows 98, Windows Me,
and Windows NT 4.0
and Windows NT 4.0
To change the switch type in Windows 95, Windows 98, Windows Me, and
Windows NT 4.0, do the following:
Windows NT 4.0, do the following:
Note:
If you are using Windows NT 4.0, the following section assumes that you
are logged on to a Windows NT 4.0 system as Administrator. If you are not
logged on as Administrator, you might not be able to perform all the steps
outlined in this chapter.
are logged on to a Windows NT 4.0 system as Administrator. If you are not
logged on as Administrator, you might not be able to perform all the steps
outlined in this chapter.
1. Click Start -> Programs -> IBM ISDN PC Card and then IBM ISDN PC Card
Setup
to start the configuration tool.
ISDNmst.fm Page 53 Wednesday, January 15, 2003 9:22 AM