Справочник Пользователя для Hawking Technology HWUG1

 

- 30 - 

Wireless Mode 

802.11 B/G mix – If you have a mix of 802.11b and 802.11g 

wireless stations in your network, it is recommended to setting the 

card to this mode. This mode is also the default setting. 

 

802.11 B or G only – This card can be compatible with both 

802.11g and 802.11b wireless stations. If there are only 802.11b 

wireless stations in the network, you can set the card to this mode.

The same goes with 802.11g only wireless stations. 

 

 

Turbo Mode 

Turbo Mode enables the card to deliver the better throughput in 

the same period and environment. 

 

 

B/G Protection 

If you have a mix of 802.11b and 802.11g wireless stations in the 

network, it is recommended that you enable the protection 

mechanism. This mechanism can decrease the rate of data 

collisions between 802.11b and 802.11g wireless stations. When 

the protection mode is enabled, the throughput of the card will be 

a little lower due to more complex data packets that must be 

transmitted. 

Auto – Based on the status of the network and automatically 

disable/enable protection mode. 

 

On – Always enable the protection mode. 

 

Off – Always disable the protection mode. 

Fast Roaming 

These settings should only be used for advanced system 

administrators only. 

 

 

Tx Rate 

There are several options including 

Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select. 

When the “Auto” is selected, the device will choose the most 

suitable transmission rate automatically. The higher data rate you 

designated in the network, the shorter distance is allowed 

between the card and the wireless stations. 

 

When the wireless mode is “802.11 B only”, the maximum data 

rate is 11Mbps (11b) so that there are only “Auto/1/2/5.5/11Mbps” 

options you can select. 

 

 

Turn Off RF Button 

If you want to turn off the radio of the card temporarily, click this 

button. To turn on the radio, click this button again.